六合宝典

专注于工业润滑油销售
品牌润滑油授权经理商,正品保证
网站首页 | 关于我们 | 产品展示 | 产品总汇 | 润滑油知识 | 新闻资讯 | 联系我们
专注于工业润滑领域一站式采购 电话:0755-28027380 传真:0755-28027382 手机:13926530627 13537722320
工业润滑油专区

联系我们
深圳市鑫盈科贸易有限公司
地址:深圳宝安区龙华新区民治工业区
电话:0755-28027380
传真:0755-28027382
联系人:13926530627 蒋先生 13537722320 赵小姐
手机:13926530627 13537722320
网址:
邮箱:[email protected]

 

 
产品展示 >> SHELL GADUS S5 V42P 2.5/Shell Nerita HV
SHELL GADUS S5 V42P 2.5/Shell Nerita HV详细说明 (浏览731次)
SHELL GADUS S5 V42P 2.5
Shell Gadus S5 V42P Extra Protection & Long Life
High Speed
Lithium
Advanced Extreme Pressure Grease for
High Speed Bearings
Customer Benefits
Cost Savings via
Lower seal costs that result from the use of advanced XHVI base oils instead of PAOs and/or
esters that are more compatible with seal materials allowing lower cost seals to be used while
obtaining the same extended life.
Lower maintenance costs due to the extra long service life that can be obtained in electrical
motors & high speed bearings that result from the use of an appropriate thickener and selected
additive technology, developed & tested by Shell
Reduced cost due to the excellent performance in high speed machine tool bearings that usually
employ far more expensive greases from specialist companies (eg Kluber Staburags), this
performance results from the leading edge technology that comes from investing continuously in
Grease R&D
Peace of Mind via
The proven nature of the technology, that is evident from the approval by leading companies such
as SNR, ABB, in a range of applications which grows every year.
The knowledge that Shell is in FULL control from Research & Development to manufacture &
quality assurance in our own ISO approved plants, which are regularly audited and passed by
quality conscious customers buying Shell Gadus S5 V42P.
Availability of Shell expertise, to assist in safely developing the cost savings available from the
wide range of Shell products
No Health & Safety concerns, as Shell Shell Gadus S5 V42P is free from any harmful component
vs EC requirements.
Convenience via
Guaranteed suitable lubrication of equipment world-wide, as this product is part of the
International SeaShell range of products, which can be found throughout the world, and is
actually used for electrical motor bearings in Shell oil rigs and refineries world-wide.
Key Industry Sectors & Applications
z General Engineering, Autocomponents
Electrical motors, high speed bearings (loaded & unloaded), high speed machine tool bearings, bearings of
industrial fans, wheel bearings,.. with a n.Dm factor above 250,000. Operating Temperature Range
Shell Gadus S5 V42P is recommended for use over the temperature range -30°C to 130°C
Health & Safety
Shell Gadus S5 V42P is unlikely to present any significant health or safety hazard when properly used in
the recommended application, and good standards of industrial and personal hygiene are maintained. For
further guidance on Product Health & Safety refer to the appropriate Shell Material Safety Data Sheet
Advice
For advice on applications not covered in this leaflet may be obtained from your Shell Representative
Typical Physical Characteristics
Shell Gadus Grease S5 V42P
NLGI Consistency 2.5
Colour Light brown
Soap Type Lithium
Base Oil (type) Special Mineral
(synthetic like)
Kinematic Viscosity
@ 40°C cSt
 100°C cSt
(IP 71/ASTM-D445)
42
8
Dropping Point °C
(IP 322/ASTM-D566-76)
180
Cone Penetration
Unworked @ 25°C 0.1 mm
(IP 50/ASTM-D217)
255
These characteristics are typical of current production. Whilst future production will conform to Shell's
specification variations in these characteristics may occur.

上一产品: Shell Gadus S5 V220 2/壳牌佳度S5 V220 2
下一产品: Shell Gadus S5 U100KD/Shell Darina XL 102 Moly
幸运快乐8gudegyogya.com版权所有 (C) 2009 深圳市鑫盈科贸易有限公司官方网站  All Right Reserved
地址:深圳宝安区龙华新区民治工业区 电话:0755-28027380 传真:0755-28027382 邮编:[email protected] 粤ICP备16090050号
工业润滑油|壳牌润滑油|美孚润滑油|福斯润滑油|加德士润滑油|嘉实多润滑油
友情链接:幸运快乐8官网  幸运快乐8  幸运快乐8开奖直播  幸运快乐8  幸运快乐8平台  幸运快乐8  幸运快乐8