六合宝典

专注于工业润滑油销售
品牌润滑油授权经理商,正品保证
网站首页 | 关于我们 | 产品展示 | 产品总汇 | 润滑油知识 | 新闻资讯 | 联系我们
专注于工业润滑领域一站式采购 电话:0755-28027380 传真:0755-28027382 手机:13926530627 13537722320
工业润滑油专区

联系我们
深圳市鑫盈科贸易有限公司
地址:深圳宝安区龙华新区民治工业区
电话:0755-28027380
传真:0755-28027382
联系人:13926530627 蒋先生 13537722320 赵小姐
手机:13926530627 13537722320
网址:
邮箱:[email protected]

 

 
产品展示 >> CHEVRON FM ALC EP2
CHEVRON FM ALC EP2详细说明 (浏览535次)
CHEVRON FM ALC EP
0, 1, 2
Food Machinery Grease
CUSTOMER BENEFITS
Chevron FM ALC EP greases deliver value through:
Excellent wear and rust protection
Multipurpose — Product misapplication
eliminated. Minimizes costly inventories while
providing one grease that will work in a wide variety
of applications. Available in three common NLGI
grades to meet specific equipment requirements.
Reduced operating costs
Reduced wear and sling out — Provides good
wear protection and is highly water-resistant to help
prolong machinery life.
Water tolerance — Remains grease-like even
when subject to gross water contamination or when
subjected to direct water spray.
Excellent pumpability — Readily adaptable to
centralized greasing systems. Easily handled in
conventional grease-pumping equipment.
High dropping point — Assures protection where
higher operating temperature properties are
required.
Slightly tacky and adhesive in nature
Quality control — Manufactured under closely
controlled conditions to assure a high degree of
purity food manufacturers demand today.
Compliance with state and federal
regulations — Composed of materials approved by
FDA as incidental or accidental food additives.
Corrosion protection — Provides excellent
corrosion protection during food processing and
plant cleanup procedures
EP properties — Excellent Timken and Four Ball
Weld Point values.
FEATURES
Chevron FM ALC EP food machinery greases are high
performance, multipurpose products that are white in
color, odorless, tasteless, and water-resistant.
Available in three NLGI grades, Chevron FM ALC EP
were developed for the food processing and canning
industries.
Chevron FM ALC EP greases are comprised of an
aluminum complex thickener and food grade white oils
containing a highly effective rust inhibitor package.
They are smooth and buttery in texture, and are also
slightly tacky.
All grades contain specially-blended additives that
impart improved adhesive and stringiness properties to
the grease.
APPLICATIONS
Chevron FM ALC EP food machinery greases are multipurpose
lubricants suitable for all grease-lubricated
machinery located in canneries, beverage bottlers and
canners, potato/corn chip processors, candy manufacturers,
meat and poultry packers, frozen food processors,
and other food producers and processors. They
are specifically recommended for critical applications
where there is a possibility of the lubricant becoming
an incidental food ingredient.
NLGI 0 is preferred for low temperature operations,
particularly in centralized grease systems.
NLGI 1 and 2 are preferred for general plant lubrication
including applications such as electric motors and
wheeled vehicles where NSF-registered H2 lubricants
are often used. This allows for a reduction in the number
of greases used in the plant.
NLGI 2 is also recommended for those applications
where the grease is exposed to high temperatures,
steam, and centrifugal action causing throw-off.
Typical applications for Chevron FM ALC EP greases in
processing plants include:
Electric motor bearings
Pump shaft bearings
Conveyor belts
— Head, tail, and roller bearings
Food handling machinery - Mechanical linkage
Automatic lube systems
Grease gun application
Grease packed bearings
Slides and ways
Mobile equipment
Wheel bearings
Grease fittings
Seamers
Chevron FM ALC EP — Continued
2007 Chevron Products Company. San Ramon, CA. All rights reserved. 31 October 2007
FPL-8
Chevron FM ALC EP:
are formulated in compliance with the U.S. Food
and Drug Administration (FDA) requirements
for lubricants with incidental food contact, 21 CFR
178.3570 and other sections referenced therein.
Lubricants with incidental food contact should not
contaminate food at levels greater than 10 ppm.
are certified by NSF and are acceptable as a
lubricant where incidental food contact may occur
(H1) in and around food processing areas. The NSF
Nonfood Compounds Registration Program is a
continuation of the USDA product approval and
listing program, which is based on meeting
regulatory requirements of appropriate use,
ingredient review and labeling verification.
are certified Kosher and Pareve.
are accepted by the Canadian Food Inspection
Agency for use in Registered Plants and for use on
food equipment or machinery parts where contact
with food is only incidental.
TYPICAL TEST DATA
Typical test data are average values only. Minor variations which do not affect product performance are to be expected in normal
manufacturing.
1 Minimum operating temperature is the lowest temperature at which a grease, already in place, could be expected to
provide lubrication. Most greases cannot be pumped at these minimum temperatures.
2 Maximum operating temperature is the highest temperature at which the grease could be used with frequent (daily)
relubrication.
* Determined on mineral oil extracted by vacuum filtration.
NLGI Grade 0 1 2
Product Number 230202 230203 230204
MSDS Number 14860 14860 14860
Operating Temperature, °C(°F)
Minimum1
Maximum2
-20(-4)
163(325)
-20(-4)
163(325)
-20(-4)
163(325)
Penetration at 25°C(77°F)
Unworked
Worked
340
370
295
325
250
280
Dropping Point, °C(°F) 232(450) 260(500) 260(500)
Timken OK load, lb 40 40 40
Four-Ball
Weld Point, kg
Wear Scar Diameter, mm
500
0.60
500
0.60
500
0.60
Thickener, %
type
5.8
Aluminum Complex
6.9
Aluminum Complex
7.7
Aluminum Complex
ISO Viscosity Grade, Base Oil Equivalent 220 220 220
Viscosity, Kinematic*
cSt at 40°C
cSt at 100°C
200
20.6
200
20.6
200
20.6
Viscosity, Saybolt*
SUS at 100°F
SUS at 210°F
1045
104
1045
104
1045
104
Viscosity Index* 120 120 120
Flash Point, °C(°F)* 246(475) 246(475) 246(475)
Pour Point, °C(°F)* -25(-13) -25(-13) -25(-13)
Texture Smooth, Adhesive
Color White

上一产品: FUCHS gleitmo 593/FUCHS gleitmo593
下一产品: CHEVRON FM ALC EP1
幸运快乐8gudegyogya.com版权所有 (C) 2009 深圳市鑫盈科贸易有限公司官方网站  All Right Reserved
地址:深圳宝安区龙华新区民治工业区 电话:0755-28027380 传真:0755-28027382 邮编:[email protected] 粤ICP备16090050号
工业润滑油|壳牌润滑油|美孚润滑油|福斯润滑油|加德士润滑油|嘉实多润滑油
友情链接:幸运快乐8  幸运快乐8平台  幸运快乐8开奖  幸运快乐8  幸运快乐8  幸运快乐8  幸运快乐8开奖